Request for Quote:

Dictionary – Q

 

QUARTER HARD (No 3 TEMPER)

(A) In low carbon cold-rolled strip steel, a medium soft temper produced by a limited amount of cold rolling after annealing. (B) In brass mill terminology. Quarter-Hard is one B and S number hard or 10.95% reduction. (C) In stainless steel terminology tempers are based on minimum tensile, or yield strength. ForChromium-Nickel grades Quarter Hard Temper is 125,000 T.S., 75,000 Y.S. min.


QUENCHING

In the heat treating of metals, the step of cooling metals rapidly in order to obtain desired properties; most commonly accomplished by immersing the metal in oil or water. In the case of most copper base alloys, quenching has no effect other than to hasten cooling.


QUENCH HARDENING

(Steel) – A process of hardening a ferrous alloy of suitable composition by heating within or above the transformation range and cooling at a rate sufficient to increase the hardness substantially. The process usually involves the formation of martensite.